中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 8813-2020 硬质泡沫塑料 压缩性能的测定(中英文版) Rigid cellular plastics—Determination of compression properties |
|||
HG/T 4960-2016 保温板用硬质聚氨酯泡沫组合聚醚(中英文版) Blend polyol for rigid polyurethane cellular plastics used in insulation panels |
|||
GB/T 20219-2015 绝热用喷涂硬质聚氨酯泡沫塑料(中英文版) Rigid cellular plastics-spray-applied polyurethane foam for thermal insulation |
|||
GB/T 29288-2012 热塑性硬质聚氨酯泡沫塑料通用技术条件(中英文版) General requirement for thermoformable rigid polyurethane cellular plastics |
|||
HG/T 4395-2012 太阳能热水器用聚氨酯硬泡组合聚醚(中英文版) Blend polyol for rigid polyurethane cellular plastics used in solar water heaters |
|||
GB/T 26700-2011 门体填充用硬质聚氨酯泡沫塑料(中英文版) Rigid polyurethane(PUR)cellular plastics used for doors filling |
|||
GB/T 26689-2011 冰箱、冰柜用硬质聚氨酯泡沫塑料(中英文版) Rigid polyurethane cellular plastics used in refrigerators and freezers |
|||
GB/T 10007-2008 硬质泡沫塑料 剪切强度试验方法(中英文版) Rigid cellular plastics - Determination of shear strength |
|||
GB/T 8333-2008 硬质泡沫塑料燃烧性能试验方法 垂直燃烧法(中英文版) Test method for flammability of rigid cellular plastic - Virtical burning method |
|||
GB/T 21558-2008 建筑绝热用硬质聚氨酯泡沫塑料(中英文版) Rigid polyurethane cellular plastics used in the thermal insulation of building |
|||
GB/T 8813-2008 硬质泡沫塑料压缩性能的测定(中英文版) Rigid cellular plastics - Determination of compression properties |
|||
GB/T 10799-2008 硬质泡沫塑料 开孔和闭孔体积百分率的测定(中英文版) Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells |
|||
GB/T 21332-2008 硬质泡沫塑料 水蒸气透过性能的测定(中英文版) Rigid cellular plastics - Determination of water vapour transmission properties |
|||
GB/T 8811-2008 硬质泡沫塑料 尺寸稳定性试验方法(中英文版) Test method for dimensional stability of rigid cellular plastics |
|||
GB/T 21333-2008 硬质泡沫塑料 自结皮高密度材料试验方法(中英文版) Cellular plastics,rigid - Test methods for self-skinned,high-density materials |
|||
GB/T 8812.2-2007 硬质泡沫塑料 弯曲性能的测定 第2部分: 弯曲强度和表观弯曲弹性模量的测定(中英文版) Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity |
|||
GB/T 8812.1-2007 硬质泡沫塑料 弯曲性能的测定 第1部分:基本弯曲试验(中英文版) Rigid cellular plastics - Determination of flexural properties - Part 1: Basic bending test |
|||
QB/T 2904-2007 自结皮硬质聚氨酯泡沫塑料(中英文版) Rigid self-skinned polyurethane cellular plastics |
|||
GB/T 20673-2006 硬质泡沫塑料 低于环境温度的线膨胀系数的测定(中英文版) Cellular plastics - Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures |
|||
GB/T 20672-2006 硬质泡沫塑料 在规定负荷和温度条件下压缩蠕变的测定(中英文版) Cellular plastics, rigid - Determination of compressive creep under specified load and temperature conditions |
找到:25條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 |